Wipro Lighting is in the business of manufacturing and marketing Wipro Brand of Luminaires, Lamps and Accessories. Wipro Lighting caters to both institutional and retail consumers and offers comprehensive lighting solutions across various application areas. Wipro Lighting is part of the Wipro Consumer Care & Lighting Division of Wipro Limited. Wipro Limited is a Rs. 8170 crore diversified corporate having interests in Information Technology, Healthcare, Infrastructure Engineering and Consumer Care.

SOFTLITE & BABY SOFTLITE

SOFTLITE : Specifications

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Detachable perforated cylindrical shaped diffuser with square perforation in white powder coated steel incorporating opalescent polyester foil
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 36 W CFL, 2 x 55 W CFL and 2 x 36 W FTL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP modular ceiling systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987



Customer Benefits:

  • Balanced lighting in vertical and horizontal planes More spacious look in the work place
  • Higher employee efficiency, effectiveness and productivity
  • No discomfort glare on the VDT screen
  • Good modelling. People faces are well lit
  • Energy efficient with various control gear options

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate 2 G11 lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

BABY SOFTLITE Specifications:

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Softlite series - Perforated cylindrical shaped diffuser in white powder coated steel incorporating opalescent polyester foil
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 18 W CFL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP Modular Ceiling Systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

Customer Benefits:

  • Balanced lighting in vertical and horizontal planes
  • Good modelling and more spacious look in the work place
  • Easier adaptation to human eye reducing fatigue and stress
  • Higher employee efficiency, effectiveness and productivity
  • No discomfort glare on the VDT screen
  • Energy efficient with various control gear options
  • top

FUSION & BAYFUSION

FUSION : Specifications

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Detachable cylindrical shaped diffuser with paralite P5 louvres
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 36 W CFL, 2 x 55 W CFL and 2 x 36 W FTL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP Modular Ceiling Systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987



Customer Benefits:

  • Balanced lighting in vertical and horizontal planes
  • More spacious look in the work place
  • Higher employee efficiency, effectiveness and productivity
  • No discomfort glare on the VDT Screen
  • Good modelling. People faces are well lit
  • Energy efficient with various control gear options

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate 2 G11 lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

BABY FUSION Specifications:

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Fusion series - Cylindrical shaped diffuser with paralite P5 louvres
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 18 W CFL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP Modular Ceiling Systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

Customer Benefits:

  • Balanced lighting in vertical and horizontal planes
  • Good modelling and more spacious look in the work place
  • Easier adaptation to human eye reducing fatigue and stress
  • Higher employee efficiency, effectiveness and productivity
  • No discomfort glare on the VDT screen
  • Energy efficient with various control gear options
  • top

SOFTLITE 2 & FUSION 2

SOFTLITE 2 : Specifications

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Swivelable perforated cylindrical shaped diffuser in white powder coated steel incorporating opalescent polyester foil
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 36 W CFL, 2 x 55 W CFL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP Modular Ceiling Systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987



Customer Benefits:

  • Balanced lighting in vertical and horizontal planes
  • More spacious look in the work place
  • No discomfort glare on the VDT Screen
  • Good modelling. People faces are well lit
  • Energy efficient with various control gear options

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate 2 G11 lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

FUSION 2 Specifications:

  • Wing shaped reflector-cum-housing constructed in white epoxy polyester powder coated steel
  • Swivelable lamp shield with paralite P5 louvres gives glare free direct light
  • Complete with slim open type low loss copper ballast and accessories pre-wired upto terminal block in the control gear chassis
  • Suitable for 2 x 36 W CFL, 2 x 55 W CFL
  • Suitable for Armstrong /GRG /TRAC /USG /Celotex/ POP Modular Ceiling Systems
  • Conforms to IS 10322 / Part 5/ Sec.1: 1987

Accessories:

  • Slim open type low watt loss copper wound ballast
  • Polycarbonate lamp holders, starter seats & lamp supports
  • 2 way 5 Amps G.F.P mains connector for 1sq.mm. incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire

Customer Benefits:

  • Balanced lighting in vertical and horizontal planes
  • Good modelling and more spacious look in the work place
  • Easier adaptation to human eye reducing fatigue and stress
  • Higher employee efficiency, effectiveness and productivity
  • No discomfort glare on the VDT screen
  • Energy efficient with various control gear options

FLOAT

Specifications:

  • Powder coated extruded aluminium housing with low height, curved profile and perforations incorporating non yellowing opalescent polyester film.
  • Pressure die cast integral end caps ensure gap free and profile matching installation.
  • Specially designed reflector made pre-anodised super high purity aluminium results in wider distribution and also covers control gear which is duly wired upto the terminal block.
  • Conforms to IS 10322 / Part 5 /Sec 1 : 1987



Simple Modularity:

  • Float is a simple, modular system of interchangeable components.
  • Float is built as a lighting module and comes in 4', 8' lengths.
  • Floats modularity means no beginning, middle or end sections. All sections are interchangeable for flexibility and ease.
  • Job site management is made easier as there are fewer fixture sections to sort.
  • Fewer installation mistakes. All you do is look at your row length, choose the sections and join them together.
  • Installs in less time.

Light Weight

  • The spartan form and uncluttered light-weight aesthetics of Float do not interfere with the interiors of any environment it is used to illuminate.
  • The soft lighting provided by Float also lends an unobtrusive ambient glow.
  • The lightweight extruded aluminium body makes Float extremely light and easy to manage for installation.
  • Onsite maintenance with Float becomes effortless because of light weight.

Easy Installation

  • Specially designed easy install suspension system saves installation time.
  • Suspended by a visually appealing long-life stainless steel aircraft cable.
  • Designed for modular grid type ceiling system.
  • Two degrees of freedom through suspension height and tilt adjustment.
  • On-site suspension height adjustment from 350 to 500 mm. (best at 400mm)
  • Gap free profile matching through integral pressure die cast ends.


SUNRISE

Specifications:

  • Powder coated CRCA coating with curved profile and perforations incorporating opale scent polyester sheet.
  • Die formed end pieces welded to housing ensure gap-free and profile matching installation.
  • Specially designed reflector made of pre-anodised super high purity aluminium results in wider distribution and also covers control gear which is duly wiewd upto terminal block.
  • Suitable for 2x36 W FTL, 2x18 W FTL, 2x54 W FTL-T5, 2x28 W FTL-T5 and 2x14 W FTL-T5
  • Simple and rapid installation saves time and effort
  • Designed and manufactured to comply with IS 10322 part 5 Sec 1 1987



Accessories:

  • Slim open type low watt loss copper wound ballast
  • Sleek snap-fit rotor holder and starter seat
  • Pinch type starter with R.F. suppression capacitor
  • 4 way 5 Amps G.F.P. loop in-loop out mains connector for 1 sq mm incoming cable
  • Power factor improvement capacitor
  • Internal earthing terminal for 14 SWG earthing wire



BACK    TOP