Wipro Lighting is in the business of manufacturing and marketing Wipro Brand of Luminaires, Lamps and Accessories. Wipro Lighting caters to both institutional and retail consumers and offers comprehensive lighting solutions across various application areas. Wipro Lighting is part of the Wipro Consumer Care & Lighting Division of Wipro Limited. Wipro Limited is a Rs. 8170 crore diversified corporate having interests in Information Technology, Healthcare, Infrastructure Engineering and Consumer Care.

MLS Digital Detectors 2000/2421 Series

MLS 2000:High performance, communicating Digital detector associated with a group of luminaires

  • Advanced presence detection by passive infrared (PIR) technology
  • Regulating photocell adjusts luminaire output to maintain constant light levels
  • Communicates via the Wipro MLS bus network
  • Wipro MLS Detectors may be programmed to be members of up to four group zones
  • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes)
  • Detection pattern and range in metres under normal operating conditions
  • Remote control for temporary user-override on/off and light level adjustment
  • Two way programming enables easy re-commissioning when building use changes
  • Can be programmed to create upto 6 lighting scenes
  • Can be programmed to automatically recall Entry & Exit scenes



MLS 2421:Superior performance, programmable presence detector for lighting control in offices and open-plan workstations. It uses microwave technology which enables the range to be adjusted to ensure tailored detection pattern.

  • Advanced presence detection by microwave technology
  • Regulating photocell adjusts luminaire output to maintain constant light levels
  • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes)
  • Detection pattern and range in metres under normal operating conditions
  • Remote control for temporary user-override on/off and light level adjustment
  • Two way programming enables easy re-commissioning when building use changes

top

Bus Power Supply - RB 2000/RB 2000LT

A single Bus Power Supply synchronizes and powers bus for up to 200 MLS Digital devices. It is equipped with a test facility which provides a simple check of the bus integrity. Linking of the Bus Power Supply units enables building-wide common zones to be established without the need for additional hardware. Up to 100 Bus Power Supply units may be installed on one system to support up to 20,000 detectors.



Universal Bus Transceiver - UBT 2000

The Universal Bus Transceiver expands the scope of MLS Digital by enabling otherwise uncontrolled lighting and non-lighting loads to be brought into the system. UBTs also allow external devices to provide inputs to the system to provide global features such as load shedding and override on or off.




Scene Switch Panel (for scene setting) - MLS 2000 SSP

Allows scenes to be programmed and recalled to alter the lit environment of a group zone. Scene-setting Users can set six lighting scenes, recalling them with a single press of a button. Entry and Exit Scenes The Entry Scene is selected when the ON button is used. Similarly, there is an option to select an Exit Scene. The current scene is indicated by a red LED.




MLS Digital Local Control Plate (for scene setting) MLS LCP 1 and MLS LCP 2

The MLS LCP Local Control Plate is designed to operate as part of an MLS Digital installation. It gives simple, localized control over a group of light fittings programmed to the same zone address, allowing the end-user to raise, lower, turn on and turn off the lighting as required.

Two versions are available:
MLS LCP 1 Standard buttons with white bezel
MLS LCP 2 Vandal-resistant, stainless steel buttons with stainless steel bezel




MLS Digital Programmer - HP 2000

The HP 200 hand-held, battery-operated, infrared device is used to set all the detectors programmable features as well as to download previously programmed information for checking.




Hand-held Controller - HC 5

The HC5 allows user to make temporary adjustments to their lighting for the current occupancy period. Additionally, up to six scenes can be set and stored for future recall.





BACK    TOP