Mather + Platt, a subsidiary of WILO SE is one of the leading manufacturers of centrifugal pumps up to 50,000 m3/hr, valves up to 2600 mm diameter and pumping systems for water supply, irrigation, energy, industry, building sector and wastewater fields and is also pioneer and leader in the field of fire fighting systems from small buildings to large industrial plants.

Submersible Sewage Pumps (STS)

Features

  • Free flow Impeller to handle long fibres.
  • Fitted with permanently lubricated, low maintenance roller bearings.
  • Detachable power cable
  • High operational reliability.
  • Corrosion-proof stainless steel motor in 1.4404 (316L)

Applications:
Municipal & industrial sewage, Building & surface drainage, Sewage & Water Management, Environmental & Waste Water Treatment Technology, Industrial & Process Engineering.



Wilo-Drain STS
STS 80 FSTS 100 F
Flow Range (m /hr)20 - 12020 - 170
Head Range (m)Up to 14Up to 16
Free Ball Passage (mm)7510
InstallationStationary/PortableStationary/Portable
Motor
Three Phase, 50 HzAvailableAvailable
Insulation/Protection ClassF / IP 68F / IP 68
Switching Frequency20 per hour20 per hour
Rated Motor Power (kW)2.0 - 4.05.9 - 8.4
Speed ( rpm)14501450
Materials
Pump HousingCast IronCast Iron
ImpellersCast IronCast Iron
Shaft1.40211.4021
Mechanical Seal Pump SideSiC/SiCSiC/SiC
Shaft Seal MotorsideNBRNBR
Motor housing1.4404 (AISI 316 L)1.4404 (AISI 316 L)

top

Wastewater / Drainage TS Pumps

Features:

  • Free flow Impeller.
  • Fully assembled pump with built-in float switch & 5 mtr. power cable with shockproof plug.
  • Simple installation through integrated mounting foot.
  • Stainless steel motor.
  • High operational reliability.

Applications: Heavily contaminated fluids from Building & surface drainage, Industrial & Process Engineering.



Technical Data

Wilo-Drain TC
TC 40/8TC 40/10
Flow Range (m /hr)0 - 150 - 18
Head Range (m)Up to 9Up to 10.5
Free Ball Passage (mm)3535
InstallationStationary/PortableStationary/Portable
Motor
Single Phase, 50 HzAvailableAvailable
Insulation/Protection ClassF / IP 68F / IP 68
Switching Frequency30 per hour30 per hour
Rated Motor Power (kW)0.50.6
Speed (rpm)28502850
Materials
Pump HousingCast IronCast Iron
ImpellersResinResin
Shaft1.40051.4005
Mechanical Seal Pump SideCarbon/CeramicCarbon/Ceramic
Mechanical Seal MotorsideCarbon/CeramicCarbon/Ceramic
Static SealNBRNBR
Motor housing1.4308(AISI 304)1.4308(AISI 304)

top

Wastewater / Drainage TMW Pumps

Silent Features:

  • Patented integrated turbulator.
  • Forced-flow casing cooled, stainless steel-cased, dry electric motor.
  • with integrated thermal motor protection and automatic restart.
  • Self-cleaning pump shaft.
  • Prevents odour build-up from fluids.
  • High level of operating reliability.
  • Power Cable with shockproof plug.
  • Easy to install.
  • Simple to use.



Applications:
Pumping clear or slightly soiled water from tanks, shafts or pits, Dewatering of basement, Water transfer.

Technical Data:

Wilo-Drain TMW
TMW 32/8TMW 32/11
Flow Range (m /hr)0 - 100 - 16
Head Range (m)Up to 7Up to 10
Free Ball Passage (mm)1010
InstallationStationary/PortableStationary/Portable
Motor
Single Phase, 230 VAvailableAvailable
Insulation/Protection ClassF / IP 68F / IP 68
Switching Frequency60 per hour60 per hour
Rated Motor Power (kW)0.370.55
Materials
Pump HousingPolypropylenePolypropylene
Suction BasePolypenylene OxidePolypenylene Oxide
ImpellersPolypropylenePolypropylene
Shaft1.40211.4021
In Pumping medium areaMechanical SealMechanical Seal
Shaft seal on motor sideNBRNBR
Motor housing1.43011.4301
Connection
Discharge Port (DN/Rp)1 1/41 1/4
Weight (kg)4.76.2

top

Axial & Mix Flow Vertical Pumps

Mather & Platt range of Axial and Mix Flow Pumps, offered in Single and Multi-Stage designs, can handle flow rates up to 30,000 m3/hr. at heads up to 450 m. These pumps are well known for their rugged construction and trouble-free performance.

These pumps consume less power due to better hydraulics and higher efficiencies.Mather & Platt range covers all applications like Water Supply, Irrigation, Fire Fighting, Cooling Water, Raw Water, Storm Water Drainage, Dock Drainage, etc.



Applications :
Water supply, irrigation, power plants, steel mills, industry, oil & petro-chemical, mines, desalination plants

Technical Data :

Discharge column sizes100 mm to 1800mm
CapacityUp to 25,000 cum/hr (30,000 cum/hr on request)
HeadUp to 450 m
Maximum speed3000 rpm (50 hz), 3600 rpm (60hz)
Maximum pressureUp to 70 bar
TemperatureStandard 80 deg c ( up to 105 deg c on request)
OptionsPull out design, shaft enclosing tube
MaterialsCast iron, ductile iron, bronze, ss ( special materials duplex ss, cast steel, ni resist, alloy steel on request)
Bearing optionsAntifriction bearings/ tilting pad thrust bearing
MaterialsCast iron, ductile iron, bronze, stainless steel (special materials duplex stainless steel, cast steel, ni resist, alloy steel on request)
Bearing optionsAntifriction bearings / journal bearings
LubricationGrease or oil
SealingPacked gland (mechanical seal on request)

top

Jet WJ Pumps

Applications:  Ideal for banglows, row houses, green house, hotels, water supply, sprinklers.

Available Product Range:

  • Jet WJ
  • Jet FWJ
  • Jet HWJ



Features WJ:

  • Self Priming
  • Compact construction
  • Simple Commissioning
  • All Hydraulic components are corrosion proof.

Features FWJ:

  • Complete pre-assembled system
  • Fitted with Wilo Fluid Control
  • All Hydraulic components are corrosion proof.

Features HWJ:

  • All Hydraulic components are corrosion proof.
  • Supplied with pressure vessel (20/50 L)
  • Reduction of switch on frequency and the avoidance of pressure surges due to the diaphragm.
  • Full electrical and hydraulic circuitry, quick and safe to install.


BACK    TOP